Why is periodic inspection mandatory?
The Regulation on Health and Safety Conditions in the Use of Work Equipment (Official Gazette 28628, 25.04.2013) and the Regulation on Health and Safety Measures in Workplace Buildings (Official Gazette 28710, 17.07.2013) require periodic inspection of electrical installations and record keeping.
Early detection of faulty or incomplete installations under dynamic loads directly reduces the risk of accidents and fires.
Conformity inspection and report
Inspections are performed by EMO-authorised electrical engineers in line with TS EN ISO/IEC 17020. Our reports are valid in Ministry of Labour OHS audits. Installations with no non-conformities receive an electrical installation conformity report valid for one year and accepted by all institutions including TSE.
What we inspect
- Main and sub-distribution boards, lighting boards
- Fuse boxes and cable trays
- Machinery and equipment circuits, motors
- Static points such as generators, compressors and booster pumps
- Switches, sockets and socket combinations, luminaires
- Lightning protection installations
Measurement and reporting services
- Lightning protection measurement, inspection and report
- Harmonic and power quality measurement
- Thermal camera surveys
- Noise level (dB) measurement
- Protection relay setting, coordination and testing
- Residual current device (RCD) measurements
- Continuity tests
- Earthing measurement and report
Frequently asked questions
How long is the conformity report valid?
One year. The inspection must be repeated every year by law.
Are your reports accepted in OHS audits?
Yes. Our reports are valid in occupational safety audits by Ministry of Labour inspectors.
Do you test residual current devices?
Yes. RCD measurements are part of our periodic inspection.

